you are here: home > hardware > docs > modding
Call trans opt: receveid. 9-18-99 14:32:31 REC:log>
WARNING: carrier anomaly
Trace program: running
> Welcome 38.103.63.57
18.11.2008 - 16:03 (15:03 GMT)
5orry, you have... NO MAIL.

Modding: The Complete Documentation

  • This category contains 2 Papers
  • The last paper was added on 2007-03-26 (YYYY-MM-DD)

Complete ATI Radeon 9800 Pro Voltage Modding Guide Rev. 1.1!

Published on 2004-06-29, by Max_87, ©Adrian Wong.

As most of you know, a voltage boost is always useful in improving a processor's overclockability. Increasing the processor's voltage allows it to run faster than it normally can, albeit at the expense of a higher thermal output. The best part is increasing the processor's voltage is usually a simple matter of going into the BIOS and adjusting its voltage setting. You can also do the same to your system memory!

File infos:

X800 GTO² to X850 XT Mod

Published on 2005-09-13, by W1zzard, ©techPowerUp.com.

Sapphire's special version of the X800 GTO is called X800 GTO². As you can see in the following picture it uses an R480 core, which is also used on the X850 Pro, XT and XT PE.

The GTO² comes with 12 pipelines enabled by default, but the only lock which limits it to this number of pipelines is located in the Bios.

No cards with defective pipelines have been found yet, which means (so far) the success rate is 100%.

The mod presented here allows to unlock your X800 GTO² to run at 16 pipelines.

File infos:

Created: 2008-11-18 14:04 | Modified: 2008-10-17 10:36 | Size: 6497 octets

Search:

Search:



 

This page is also available in the following languages:
| English |